|
|
 |
 |
|
 |
|
| |
|
|
|
ANTI-SEIZE & LUBRICATING COMPOUND REGULAR
GRADE
|
|
What is NEVER-SEEZ
Compound ?
NEVER-SEEZ Compound is a superior, high temperature
anti-seize and lubricating compound containing
very finely coated metallic particles in a
special hydrocarbon carrier which seal and
protect metal parts under the most extreme
conditions of heat, pressure, and contamination's.
The fine, protective film of NEVER-SEEZ cannot
be burned off or completely removed by abrasion.
NEVER-SEEZ Compound cannot be washed off by
fresh or salt water. Application of NEVER-SEEZ
insures trouble-free protection against seizure,
corrosion, pitting, and galling of metal parts.
The costly expense of down-time, maintenance
and repair of parts can be greatly reduced
by using NEVER-SEEZ Compound, and advanced
anti-seize and sealing material which also
has excellent lubricating qualities. NEVER-SEEZ
Compound, as a lubricant with unusual anti-seize
qualities, is an excellent extreme pressure
and high temperature material for many BEARING
APPLICATIONS.
Why use NEVER-SEEZ
Compound?
Reduce "Down-Time" Cut Cost of Replacement
Parts Speed-Up Repair Easy Maintenance
 |
Effective
as an anti-seize compound to 980
ºC and in temperatures as
low as -180 ºC (Cryogenic
Applications). Provides wide range
of protection.
|
|
Resists
water washout and salt action
will not wash off or dissolve
in spray. |
|
Contains
no silicone, molybdenum disulphide
or lead. |
|
Non-Corrosive
and inert. No reaction with any
other metals. |
|
Resists
galvanic action between dissimilar
metals, eliminates metal to metal
electrolysis and
pitting.
|
|
Protects
against carbon fusion-----reduces
Diesel engine down-time |
|
Non-Toxic
, excellent for use on food processing
machinery |
|
Unusual
spreadability very economical
upto 186 sq.ft. It coverage per
lb. based on film thickness
of 4 mills, will provide a continuous
film as thin as 1/2 mill.
|
|
Inert
to most gases, including propane,
butane natural gas, helium, freon
and nitrogen. DO NOT use NEVER-SEEZ
with oxygen systems. NEVER-SEEZ
"NICKEL SPECIAL" should
be used when ammonia and acetylene
are present. |
|
Excellent
for preventing seizure of stainless
steel parts. |
|
NEVER-SEEZ
is impervious to strong alkaline
solutions. |
|
Extreme
pressure characteristics over
32,000 psi |
|
NEVER-SEEZ® 'Industrial Applications
Unlimited'
| 1. |
Foundry
: For coating the mold, before
pouring in metal to keep the mold
from sticking to the metal and
causing breakage in removal. |
| 2. |
Gas
Utility : The shut-off valves
under ground. |
| 3. |
Bethlehem
Steel uses NEVER-SEEZ on the soot
blowers of the open hearth and
blast furnaces. The stainless
steel fittings are subject to
terrific heat and corrosion. Previously,
these fittings had to be burned
off. Now they are able to unthread
and save Rs.100 per fitting in
addition to the time saved. |
| 4. |
To
prevent sticking of brushes on
field generators. |
| 5. |
Soldering
Irons : Tips were galling
and corroding due to heat and
oxidation, making it difficult
or impossible to exchange soldering
iron tips. NEVER-SEEZ eliminated
this and reduced oxidation and
scaling. Now there are no problems. |
| 6. |
To
facilitate assembly and disassembly
of press fits, splines, and keyed
assemblies. |
| 7. |
Pipe
thread compound for tighter, leakproof,
threaded joints in hot or cold
lines handling water, steam, oil,
chemicals, etc. Fittings will
not seize and disassembly is easy,
saves time and money. |
|
TECHNICAL
SPECIFICATIONS
| Color |
Silver |
| Temperature
range |
-180
ºC to 980 ºC |
| Solvent
resistance |
Excellent
in water, salt water, and
ionized water
|
| Particle
size |
1
micron maximum |
| Viscosity
(CP) |
450,000 |
| NLGI
Grade (ASTM D-217) |
1 |
| Specific
gravity |
1.26 |
| Flash
point |
260
ºC open cup |
| Dropping
point (ASTM D-556) |
180
ºC |
| Coefficient
of friction @ 75 ºC.(ASTM
D-2266) |
042 |
| Extreme
pressure properties (ASTM D-2783) |
32.00
psi |
| Worked
penetration (ASTM D-217-A) |
300
- 350 |
| Copper
corrosion test (100 ºC 24
hours) |
No
corrosion |
|
ELECTRICAL PROPERTIES
|
Dissipation
|
Dielectric
|
Resistivity
|
Conductivity
|
|
Cycles
|
Factor
|
Constant
|
OHMS-cm
|
Mhos/cm
|
|
1,000
|
.0255
|
14.6
|
4.2 x 109
|
6.76 x 1010
|
|
10,000
|
.0031
|
13.4
|
4.2 x 109
|
3.77 x 1010
|
|
MEETS SPECIFICATIONS
MIL-A-907D
|
|
|
|
|
|
