|
|
 |
 |
|
 |
|
| |
|
SELCO ANTI SEIZE COMPOUND
|
|
|
|
What is SELCO Anti
Seize Compound ?
SECLO Anti Seize Compound is a superior, high
temperature anti-seize and lubricating compound
containing very finely coated metallic particles
in a special hydrocarbon carrier which seal
and protect metal parts under the most extreme
conditions of heat, pressure, and contamination's.
The fine, protective film of SELCO ANTI-SEIZE
cannot be burned off or completely removed
by abrasion. ANTI SEIZE Compound cannot be
washed off by fresh or salt water. Application
of ANTI -SEIZE insures trouble-free protection
against seizure, corrosion, pitting, and galling
of metal parts. The costly expense of down-time,
maintenance and repair of parts can be greatly
reduced by using ANTI SEIZE Compound, and
advanced anti-seize and sealing material which
also has excellent lubricating qualities.
ANTI -SEIZE Compound, as a lubricant with
unusual anti-seize qualities, is an excellent
extreme pressure and high temperature material
for many BEARING APPLICATIONS.
Why use SELCO Anti
Seize Compound?
Reduce "Down-Time" Cut Cost of Replacement
Parts Speed-Up Repair Easy Maintenance
 |
Effective
as an anti-seize compound to 980
ºC and in temperatures as
low as -180 ºC (Cryogenic
Applications). Provides wide range
of protection.
|
|
Resists
water washout and salt action
will not wash off or dissolve
in spray. |
|
Contains
no silicone, molybdenum disulphide
or lead. |
|
Non-Corrosive
and inert. No reaction with any
other metals. |
|
Resists
galvanic action between dissimilar
metals, eliminates metal to metal
electrolysis and pitting. |
|
Protects
against carbon fusion-----reduces
Diesel engine down-time |
|
Non-Toxic
, excellent for use on food processing
machinery |
|
Unusual
spreadability very economical
upto 186 sq.ft. It coverage per
lb. based on film thickness of
4 mills, will provide a continuous
film as thin as 1/2 mill. |
|
Inert
to most gases, including propane,
butane natural gas, helium, freon
and nitrogen. DO NOT use ANTI
-SEIZE with oxygen systems. ANTI
SEIZE "NICKEL SPECIAL"
should be used when ammonia and
acetylene are present. |
|
Excellent
for preventing seizure of stainless
steel parts. |
|
ANTI
SEIZE is impervious to strong
alkaline solutions. |
|
Extreme
pressure characteristics over
32,000 psi |
|
ANTI SEIZE 'Industrial Applications Unlimited'
| 1. |
Foundry
: For coating the mold, before
pouring in metal to keep the mold
from sticking to the metal and
causing breakage in removal. |
| 2. |
Gas
Utility : The shut-off valves
under ground. |
| 3. |
Steel
Plants use on the soot blowers
of the open hearth and blast furnaces.
The stainless steel fittings are
subject to terrific heat and corrosion.
Previously, these fittings had
to be burned off. Now they are
able to unthread and save Rs.100
per fitting in addition to the
time saved. |
| 4. |
To
prevent sticking of brushes on
field generators. |
| 5. |
Soldering
Irons : Tips were galling
and corroding due to heat and
oxidation, making it difficult
or impossible to exchange soldering
iron tips. NEVER-SEEZ eliminated
this and reduced oxidation and
scaling. Now there are no problems. |
| 6. |
To
facilitate assembly and disassembly
of press fits, splines, and keyed
assemblies. |
| 7. |
Pipe
thread compound for tighter,
leakproof, threaded joints in
hot or cold lines handling water,
steam, oil, chemicals, etc. Fittings
will not seize and disassembly
is easy, saves time and money. |
|
TECHNICAL
SPECIFICATIONS
| Color |
Silver |
| Temperature
range |
-180
ºC to 980 ºC |
| Solvent
resistance |
Excellent
in water, salt water, and
ionized water
|
| Particle
size |
1
micron maximum |
| Viscosity
(CP) |
450,000 |
| NLGI
Grade (ASTM D-217) |
1 |
| Specific
gravity |
1.26 |
| Flash
point |
260
ºC open cup |
| Dropping
point (ASTM D-556) |
180
ºC |
| Coefficient
of friction @ 75 ºC.(ASTM
D-2266) |
042 |
| Extreme
pressure properties (ASTM D-2783) |
32.00
psi |
| Worked
penetration (ASTM D-217-A) |
300
- 350 |
| Copper
corrosion test (100 ºC 24
hours) |
No
corrosion |
|
ELECTRICAL PROPERTIES
|
Dissipation
|
Dielectric
|
Resistivity
|
Conductivity
|
|
Cycles
|
Factor
|
Constant
|
OHMS-cm
|
Mhos/cm
|
|
1,000
|
.0255
|
14.6
|
4.2 x 109
|
6.76 x 1010
|
|
10,000
|
.0031
|
13.4
|
3.5 x 109
|
3.77 x 1010
|
|
|
|
|
|
|
|
