|
|
| |
Bearing
Greases > Lithium Greases > |
|
| |
|
|
|
SYNTHETIC LUBRICATING GREASE
|
|
DESCRIPTION
SELCO SG-360 is high-performance grease, which
combines a synthesized hydrocarbon base fluid
with a lithium complex soap thickener. The
thickener system provides a high dropping
point, excellent resistance to water wash,
and a tenacious structural stability. The
unique physical properties of the synthetic
base oil, combined with selected additives,
provide outstanding protection against wear,
rust, corrosion, and high-temperature degradation.
The wax-free feature of the synthetic base
oil allows for low-temperature mobility/pumpability
and very low starting and running torque values.
Also, the traction property of the synthetic
base fluid is considerably lower than mineral
oil, allowing for temperature reductions in
the load zone of rolling element bearings.
APPLICATION
SELCO SG-360, is recommended for aviation
applications which need a lubricant that can
perform normal functions yet go far beyond
in terms of high and low temperature and long-life
performance. It is true wide-temperature,
multi-service grease.
TYPICAL CHARACTERISTICS
Physical characteristics are listed in the
table. Those not shown as maximum or minimum
are typical and may vary slightly.
ADVANTAGES
SELCO SG-360 is a synthetic grease provides
these advantages when compared with mineral
oil greases intended for similar service:
 |
Operating
range of - 60 ° C. (-76 ° F.)
To + 225 ° C. + (437 ° F.) |
|
Excellent
resistance to rust, corrosion, and oxidation |
|
Outstanding
structural stability in the presence
of water |
|
Excellent
wear protection under heavy loads and
high temperatures |
|
Power-saving
capabilities |
|
Extended
relubrication intervals - Low volatility |
SPECIFICATIONS
| NLGI GRADE |
00 |
| Soap Type |
Lithium Complex |
| Structure |
Smooth,Slight
Tack |
| Penetration
at 25 ° C (77 ° F.) |
|
| ASTM D 217,
worked, 60 strokes |
400 |
Dropping
Point, ° C.( ° F.),
ASTM D 2265 |
220(428) |
| Base Oil
Viscosity |
|
| cSt at 40
° C. |
46 |
| cSt at 100
° C. |
7.8 |
| ISO VG, Base
Oil |
46 |
EP and Wear
Protection
Four-Ball Wear, Scar Dia, mm, max.
Four-Ball EP, Weld Load, ASTM D 2596,
kg.
Four-Ball EP, Load Wear Index |
None |
| Corrosion
Preventation, ASTM D 1743 |
pass |
| Emcor/SKF
Water Wash Test, IP 220 |
0.0 |
Water Washout,
ASTM D 1264, 79 ° C.
(175 c ° F.), wt. %, max. |
5.5 |
Evaporation,
ASTM D 972, % at
177 ° C. (350 °F)
|
|
|
|
|
|
|
|
