|
|
| |
Bearing
Greases > Water Repellent Greases
> |
|
| |
|
|
|
|
GENERAL DESCRIPTION
SG-900 Grease consists of a Silicone Lubricating
fluid thickened with a special complex Lithium
soap.
Grease is primarily designed for use in ball
bearings operation under moderate to heavy
loads and at temperature (-50 ° C to 220°
C). This grease will be available in three
consistencies (light, medium and heavy).
PROVEN BENEFITS
 |
Excellent
resistant to oxidation |
|
Good
shear stability |
|
Excellent
antiwear characteristic |
|
Good
E.P. characteristic |
|
Does
not attract plastics |
|
Has
resistance to evaporation |
|
Long
life in moisture and corrosive
atmosphere |
|
Possess
low torque value |
|
APPLICATION
SG-900 Grease is to lubricate ball bearings
and roller bearings and other metal surfaces
operation at
-50° C to 220° C range. The grease
can be recommended for use in the following
places:
|
Kilm
pre-heater fans, Oven fans, Radiator
cooling fans |
|
Textile
hot Stenters, Slashers and Driers |
|
Conveyor
System |
|
Timer
Motor bearings |
|
Plastic
bearings and gears |
|
TYPICAL PROPERTIES
|
LIGHT
|
MEDIUM
|
HEAVY
|
| Colour |
Brown
|
Brown
|
Brown
|
| Texture |
Buttery
|
Buttery
|
Buttery
|
| Penetration
(ASTM 60 x Worked) |
290-330
|
240-280
|
190-230
|
| Dropping
point (in deg.C.) |
220
|
220
|
220
|
| Heat
stability at 150 deg. 30/hrs. |
3 max.
|
3 max.
|
3 max.
|
| Evaporation
less % @ 150/24 hrs. |
2 max.
|
2 max.
|
2 max.
|
| Action
on plastic |
Nil
|
Nil
|
Nil
|
| Water
Resistance test (as per ASTM D
1264)% Loss |
5 max.
|
5 max.
|
5 max.
|
Corrosion
test as per I.P. 220/1963
(EMCOR RUST TEST) |
Passes
|
Passes
|
Passes
|
Oxidation
stability @ 212 deg.per 500 hrs.
Drop in pressure in LBS/SQ. Inch.
|
5 max.
|
5 max.
|
5 max.
|
|
|
|
|
|
|
|
